The Pros and Cons of Most Common Home Foundations

The foundation you’re going to install in your home will still depend on your preference and budget. The foundation is basically the portion of your house that carries the load of the structure that’s going to be built upon it. No matter what kind of foundation you’re going to install, it should keep out the groundwater from penetrating, support the weight of the structure and act as a barrier to soil vapor and water.

Almost all foundations available in the market can do those jobs, but they have difference in pros and cons. While you decide the type of foundation that’s perfect for your house, you should consider a lot of things. This is the most challenging part, that’s why contractors of foundation repair Watauga TX are there to help you out. As a starter, the following are the basic things you should know about the types of foundation.

1. Slab Foundation

The most common type of foundation is the slab which requires a lot of manual labor to prepare before you build the foundation. But when compared to other types of foundation, the installation of slab foundation is simpler compare to the others. This is also popular to homeowners because it’s not that too costly.

Like all the types of foundations, installing the slab starts with pouring the concrete footers 24 inches below the projected grade. After everything is poured, two layers of concrete block are put on the footer’s top. After the laying, the internal piping is installed. After that, the concrete will add some rock filler followed by concrete (4 inches) poured in its top.

Pros:

If you’re on a budget, the slab foundation will really save you. This is by far the cheapest option out there. It also requires a low maintenance, so if you’re tight on budget you can install this.

Cons:

Even though it requires little maintenance, slab foundation is going to cost you a lot for repairs. It also doesn’t offer maximum protection from harsh weathers.

2. Crawlspace Foundations

This type of foundation is elevated from the ground. The installation is similar to the slab foundation. The contractors will pour the footing, lay the blocks and build the foundation. It takes time to build this type of foundation.

Pros:

Because of the crawl space available, you will have easy access to the utilities. You can install the ductwork, piping and wiring so you can have easy access on them once repairs and maintenance are made. It also has warmer floors compare to the slab foundation.

Cons:

One of the biggest drawbacks of crawl space foundation is that it is prone to moisture, that’s why you have to install a high-end vapor/moisture barrier.

3. Basement Foundations

Basement foundations are now built with poured concrete walls which prevent moisture permeation and structural integrity problems.

Pros:

When it comes to repair, it’s easy to do standing up because the basement is accessible. The basement can also be a seasonal living space for you family. It can also protect you from storms.

Cons:

Basement foundation is the most expensive type of foundation. It lacks natural lights, and also prone to flooding.

Tips for Hiring a Concrete Contractor

Concrete projects are always fun and pretty creative to do. There are ways for you to create whole structures with concrete alone or simple ones like bowls and plates. It’s a pretty easy job to have and it is something that would turn out great for you. If you do need a concrete contractor Boise you may need to consider doing some research.  

As advised by countless articles and professionals, it is always better to know the lay of the land before making a decision. This way there is less reason for you to have any problems and it would also be something that would turn out great in the long run. So, if you want you can always do the right thing and just have fun with it.  

In this article, you will learn some tips on hiring a concrete contractor. This way you can get the best one for you. The one that would fit right into your personality. There are countless contractors out there and all of them are good. However, not all of them would be right for you and you need to look for the one that you can rely on and be comfortable with.  

  1. CHOOSE A NUMBER OF CONTRACTORS THEN NARROW IT TO TWO OR FOUR  

You don’t always have to pick the first contractor that you choose. You can pick out a couple of contractors and make some comparison. You need to know what you are comparing for so that you have an easier time of going about it. You need to look at their price, their attitude, their workers, their insurance, these things are important.  

When you can reconcile with these points to the contractor that might be the fit for you. However, you should listen to your intuition and do it right.  

      2.WHAT WILL BE THE PERMITS THAT IS NEEDED? 

You need to discuss with your contractor what are some of the permits that are needed to start the job. An experience contractor usually knows of this fact, you also need to ask who will be taking care of the permits. There are some contractors who would make you get the permits and there are also others who would make sure that they have done what they can.  

      3. KNOW WHAT YOU WANT FROM THE PROJECT  

You need to have a plan for the design in the project. You need to have an open mind for any changes that are appropriate and necessary for the project. However, you should also be prepared to turn down some additional work in your project. There are times that you will be given a seemingly better option through a more complicated design but does the same thing for a different price.  

      4. DRAW UP A CONTRACT AND SIGNED  

You should make sure that you have contracts for the whole projects. This will help protect you if you will be scammed of the job. Materials even need to be listed down, the quantity, quality and price of the material should be written down too.